1-Inch Drop Spindle Kit (69-82 Corvette C3)Find parts that fit my vehicle

1" Drop Spindle x2LH & RH Steering ArmsMachined out of 6061-T6Raised Roll CenterRetains Factory D8 Calipers and RotorsPreserves and can Improve Ride Quality Improves HandlingRetains Suspension TravelReduced WeightRe-Use Factory Caliper Brackets and Calipers Our billet aluminum drop spindles preserve ride quality b/c spring rate is not changed and shock absorbers retain shock travel (for non lowered cars). For lowered cars with reduced shock travel, drop spindles will help improve ride because it will give back 1" of shock travel that was lost making the shock less likely to bottom out. These will pair great with BB coil springs in SB cars for a total of 1.75-2" drop or coilovers. Drop spindles will also improve handing because of a lower center of gravity. The spindles and steering arms reduce unsprung weight netting a 9 lbs. weight loss, 4.5 lbs. per side. Unsprung weight improves traction and stability by allowing the wheels to follow the contours of the road more closely, increasing tire contact and improving grip. With less mass moving up and down the wheels can change direction faster thus, making the car more responsive. These drop spindles are taller than OE. By raising roll center it decreases body roll and increases stability. Does NOT change track width. Included in this kit are 2 new late hubs. New front hubs come complete with Timken Bearings. Each hub is inspected after the races are installed for proper run out spec. This ensures no pad knock and a better braking system. Our hubs are made in America out of 4140 Annealed and are stronger than factory cast hubs. Late hubs (1969-82) are required for now.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov