1968 Corvette ididit Steering Column Paintable Tilt
Eckler's Automotive strives to bring you the BEST QUALITY parts at the BEST PRICE! That’s our personal guarantee and promise to you, our valuable customers. We’re so confident in our services and our pricing, we will match any currently advertised retail price (excluding sales pricing) for identical parts and products. If you find the same item, brand and MFG part number from any current website, advertisement, catalog or flyer, we offer here at Eckler’s. Call us at 877-815-5799 to place your order so that we can verify and then match the current retail price. It’s really that simple!
- 8-Position Tilt Steering Column Upgrade, Natural Ready To Paint Finish
- Self Cancelling Turn Signals
- 4-Way Flashers
- Includes Knobs, Handles, & Plug In Harness
- 3 7/8" Wiring Plug With 1" 48 Lower Shaft
- Fits 1968 Corvettes
- Lifetime Limited Manufacturer Warranty
- 100% Made In The USA
- NOTE: The Original Rag Joint May Be Used As Long As It's In Good Working Condition, But It Is Recommended That You Purchase A New One
- NOTE: 8-Position Tilt Column Is Designed To Fit Your 1968 Corvette And Does NOT Require Modification To Your Original Vehicle To Install
This stylish 8-position tilt column is designed to fit your 1968 Corvette and does NOT require modification to your original vehicle to install. It comes complete with a pre-welded under dash mount, a floor mount designed specifically for this column, as well as a wiring harness adapter. A rag joint is used to attach the column to the gearbox and is required for installation. The original rag joint may be used as long as it's in good working condition, but it is recommended that you purchase a new one. Using an adapter, add an aftermarket wheel or use your original steering wheel with the help of the ididit 1968 Corvette Steering Wheel Adapter.
Using an ididit installation kit, install your new steering column in place of the old. Using an adapter, add an aftermarket wheel or use your original steering wheel with the help of the ididit 1963-66 Corvette Steering Wheel Adapter. Please note the space differences when using the original steering wheel vs an aftermarket wheel.
Steering Wheel Adapter Required:
- 1969 or Newer GM Passenger Car (for Aftermarket Wheel)
- 3, 5, 6, and 9 Bolt patterns available
- 1968 Corvette Steering Wheel Adapter (for Original Wheel)
Rag Joint: A rag joint is a vibration reducer used between your column and gearbox. In some vehicles, the original rag joint is pressed onto the lower shaft of the column. If your rag joint has a pressed fit, it will need to be replaced. If your rag joint is removable, the original may be used. Please consider however that due to age, the original rag joint may be worn so please double check to make sure it is in good working condition. ididit, inc. always recommends replacing the rag joint.
1968 (C3) Ididit Steering Column, Paintable, Tilt| 1120700010 Corvette 1968
WARNING This product can expose you to chemicals including Cadmium which is known to the State of California to cause cancer on birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov
|Availability||Ships Direct From Manufacturer|
|Make / Model||Series||Body||Notes||Year|
|Make / Model Chevrolet Corvette||Series||Body||Notes||Year 1968|
|Make / Model Chevrolet Corvette Stingray||Series||Body||Notes Sting Ray Convertible||Year 1968|
|Make / Model Chevrolet Corvette Stingray||Series||Body||Notes Sting Ray Sports Coupe||Year 1968|