GForce 1970-1974 Camaro 400 Transmission Crossmember

This crossmember is installed with the G Force label facing the rear of the vehicle. A second determining feature is crossmember center tube has a 1/2″ drain slot located on the bottom and on the passenger side next to the hump weldment. The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom. To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtains Grade 8 fasteners and washers to compensateFits the following transmissions: TH400, 2004R. Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately. p/n GMTM.1970-1974 (note: distance between crossmember frame holes is approximately 30-1/2″. Measure your frame or crossmember to insure proper selection)

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov