Talk to a Camaro Sales Tech
1-877-305-8966
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$12k Summer Sweepstakes! Enter Daily>

Steeroids Power Steering Rack and Pinion Conversion Kit with Black Steering Column (67-68 Camaro)

Item EK-33-391906-1
Eckler's no longer carries the Steeroids Power Steering Rack and Pinion Conversion Kit with Black Steering Column (67-68 Camaro). Please check out 1967-1969 Camaro Ball Joint & Bumpsteer Kits for an updated selection.
Steeroids Power Steering Rack and Pinion Conversion Kit with Black Steering Column (67-68 Camaro)
Verify parts fit and get product recommendations.
Camaro Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Q&A

    Features

    • Enhances Steering And Response
    • Quick Ratio 2.75 Turns
    • Adjustable For Bump Steer
    • Saves 25 lbs Over Stock System
    • Bolt On Installation-No Cutting Or Drilling Required
    • Kit Includes:
    • Rack And Pinion- Quick Ratio 2.75 Turns Power 3.5 Turn Manual
    • Black Tilt Steering Column
    • All Necessary Brackets And Hardware
    • Hose Assembly
    • PTFE Self Lubricating Outer Tie Rod End Kit
    • Steeroids U-Joint Assembly
    • Detail
      • Eckler OEM Number: 83012

    Description

    Steeroids Rack & Pinion Conversion kit with Tilt Column for 1967 - 1969 Camaro & Firebird, Power Steering. Your classic deserves greatly enhanced steering control and improved steering feel. Stock steering boxes are vague and unresponsive, especially "on center". Steeroids Rack & Pinion offers much quicker ratios over the stock, barge-like 4 turn lock-to-lock steering. As an added benefit you get a lighter weight steering system - Steeroids saves up to 25 Lbs. when compared to the stock steering system. All Steeroids kits are an entirely bolt on installation - absolutely no welding, cutting or drilling. Installs with basic hand tools in approximately 3 hours. All Steeroids rack and pinion conversions are complete kits, all necessary parts are included. Included in the kit: Rack & Pinion, Tilt Column, All necessary Brackets, PTFE lined self-cleaning & lubricating Tie Rod Ends, U-joint Assembly, All necessary Hardware & Fasteners, and detailed Instructions. You will reuse your OE Power Steering Pump with this kit. Proudly Made In The U.S.A., Five Year Warranty.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Questions & Answers

    10 More Questions