Retainer-Input Shft.Brng-4-7/8

This is a 4-speed Toploader 1-3/8" input shaft bearing retainer with a new seal and gasket included. The flange diameter is 4-7/8" which is correct for '65-73 Toploaders with 8 bellhousing bolt holes. It works with '65-73 factory bellhousings and aftermarket scattershields. 1964 Toploaders need a 4-11/16" flange diameter retainer, and can be identified by their 4 bellhousing bolt holes. The bolt patterns on the retainers are all the same, but what is most important is the diameter of the base that fits into the bellhousing.&nb

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov