Chevy CCI Rack & Pinion Steering Kit, Mega, With Stock SteeringColumn, Small Block, 1955-1957
Item EK-57-140857-1
Eckler's no longer carries the Chevy CCI Rack & Pinion Steering Kit, Mega, With Stock SteeringColumn, Small Block, 1955-1957.
Please check out
Tri-Five Ball Joint & Bumpsteer Kits for an updated selection.
Product Information
Features, Description, Q&A
Features
- Makes Your Classic Steer & Drive Like A Modern Car
- 14.1:1 Steering Ratio
- Bolts-On, No Welding Required
- The Rack & Pinion Is Rear Steer Like The Original Steering Linkage
- This Complete Kit Includes Everything Needed
- Installation Of This Kit Requires Use Of An Alernator & Relocation Of The Alternator Using P/N 57-131991-1 Or Similar
Now Includes All NEW Rack & Pinion With Limited Life Time Warranty!
- Ecklers Legacy Number: 53-225
Description
This CCI Chevy rack & pinion steering mega kit is the best way to upgrade your classic to modern steering. You won't believe how well your classic Chevy drives once you install this kit. All major components, hardware and instructions needed to complete the installation are included; nothing is left out. Your engine must be a short water pump small block Chevy with a harmonic balancer that accepts bolt-on pulleys. If your balancer is the riveted-pulley type, order harmonic balancer P/N 57-132125-1. This rack & pinion kit utilizes the original steering column mast & works with your Chevy's stock outer tie rod ends and sleeves. The stock steering box is removed and no longer used. Some measuring and steering shaft cutting is necessary. It does require exhaust system modific
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers