Control Arms, Adjustable, Upper Rear (68-72 Chevelle)

Our rear adjustable control arms for your Chevelle make setting pinion angle easy. The control arm is designed with right and left-hand threads on the adjuster so the arm does not have to be removed in order to adjust the length. Jam nuts secure the position after adjustment. Adjustable upper arms are required if you are installing a nine inch Ford rear end.

High misalignment spherical bearings are located on the frame side allowing the rear end to have proper movement. The rear end upper pivot mounts, for street and handling applications, should use rubber bushings.

NOTE: if you use polyurethane bushings on the rear end upper mounts, the rear end of your Chevelle will go into bind at the outer limits of travel. Rubber will al

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov