1957 POLISHED ALUMINUM HOOD HINGE BRACKETS

1957 POLISHED ALUMINUM HOOD HINGE BRACKETS Hood hinges: not the thing in the engine compartment, but you have to have them! Hinges can be coated, chromed or stainless units installed to make them more The hinges on a 1957 use a small of brackets that must be used to stabilize the hinge. The original brackets are Just ugly even if they are coated or chromed. Eckler's Classic Chevy has designed a of billet aluminum brackets that replace the stock stamped steel bracket and bolts. Parts List 57-188009-1 1957 Polished Aluminum Hood Hinge Bracket Kit 57-154088-1 1957 Polished Stainless Steel Hood Hinges Tools Needed: 916" Wrench or Ratchet with 916" Socket Time Frame 12 Hour Image 1: The hood hinges on a 1957 Chevy have a of brackets that the inner edge of the outer fender lip to stabilize side-to-side movement of the hinge. These brackets are bolted to the hood hinge with a 38" X 1" bolt on each side. Image 2: The new bracket kit PIN 34-401 includes two aluminum billet brackets with ball milled lines and chrome mounting hardware. These brackets simply bolt in of the stock brackets to really dress up the stock hinges. Image 3: If you want to go that extra step, install the new stainless steel hood hinges PIN 54-31 . With the new billet brackets and the stainless steel hinges, your '57 will look super custom under the hood! Jan. 2008 data-pb-style"636B5E09582AF"justify-content: ; ; ; border- : 1px; : 0px 0px 10px; : 10px; data-pb-style"636B5E09582B9" border- : 1px; : 0px; : 0px;