Eckler's Catalogs Available Now!

$20K Sweeps! 10 Chances to Win! Enter Daily >

Find Parts That Fit My Vehicle

442 Cutlass Vista Cruiser F85 More Vehicles

Performer Plus Camshaft Kit, 350-403, Oldsmobile (64-69 F85; 64-70 Cutlass; 64-70 Oldsmobile 442; 68-69 Vista Cruiser)

Item EK-81-399250-1
Eckler's no longer carries the Performer Plus Camshaft Kit, 350-403, Oldsmobile (64-69 F85; 64-70 Cutlass; 64-70 Oldsmobile 442; 68-69 Vista Cruiser). Please check out 442/Cutlass/F85 Enginefor an updated selection.
1 Reviews of Edelbrock
Shop Owners Save More! Sign up for our dealer program
Join For FREE

    Product Information

    Features, Description, Q&A

    Features

    • Recommended Valve Springs for OEM heads: Edelbrock part # 5812
    • May require longer than stock pushrods.
    • Will not fit 1966 & earlier.
    • In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs.
    • Oil/additive must contain Zinc designed for use with flat tappet camshafts.
    • Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up.
    • Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-i
      • Eckler OEM Number: 3712

    Description

    Edelbrock Part # 3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.Camshaft Specifications: • Duration @ .050 Intake: 204 degrees • Duration @ .050 Exhaust: 214 degrees • Lift @ Valve Intake: .449” • Lift

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    5.0

    Reviews of Edelbrock Classic Engine Products (1)

    Questions & Answers

    No questions about this product yet. Ask the First Question