St. Pat's Sale - Up to 50% Off! Shop Now >

RetroSound Stereophonic 3-Channel Amplifier with Wiring Kit (Universal; Some Adaptation May Be Required)

Item EK-28-902828
Eckler's no longer carries the RetroSound Stereophonic 3-Channel Amplifier with Wiring Kit (Universal; Some Adaptation May Be Required). Please check out Model A & AA Electrical & Wiringfor an updated selection.
Shop Owners Save More! Sign up for our dealer program

    Product Information

    Description, Reviews, Q&A

    Description


    An amplifier built for single cab classic trucks and two speaker systems, the Stereophonic 3-Channel amplifier powers your left and right speakers at 65-watts RMS per channel and sends 170-watts RMS to your subwoofer. For radios with only 2 inputs, set the Stereophonics input switch to 2 channel mode and the amplifier intelligently routes the selected inputs to all three balanced outputs. The Stereophonic is 2-ohm and 4-ohm stable and bridgeable, giving you more flexibility to build your system.

    The Stereophonic Class D (digital) amplifier allows you to listen to your favorite classic hits at higher volumes with little to no distortion, thanks to its low current draw and exceptional dynamic range. High-pass and low-pass filters let you fine-tune your audio for the best listening experience, with gain and bass boost controls to help dial in the perfect amount of bass.

    Features

    3-channel amplifier
    Full-range Class D digital circuitry
    65-watts RMS x 2 channels full-range @ 4 ohms
    170-watts RMS x 1 channel subwoofer @ 4 ohms (229-watts RMS @ 2 ohms)
    Selectable input mode switch for 2 and 3 channel operation
    Bridgeable
    2-ohm and 4-ohm stable
    Built-in variable low pass and high pass full-range filters
    Bass boost and gain control
    Advanced circuitry and thermal protection
    Easily connects to your RetroSound radio via RCA inputs
    Works with any aftermarket radio with low-level RCA outputs
    Dimensions: 9.4 in x 5.3 in x 1.87 in (24 cm x 13.4 cm x 4.75 cm)
    Optional Wiring Kit

    Simplify the installation of your RetroSound® Stereophonic amplifier with this convenient wiring kit that includes everything you’ll need to get your 3-channel amplifier installed. The RetroSound 3 Channel Amplifier Wiring Kit comes with: one 30 amp mini-ANL fuse and quality fuse holder, 13 ft (4 m) of 8-gauge red power wire, 5 ft (1.5 m) of 8-gauge black ground wire, 13 ft (4 m) of 18-gauge blue turn-on wire, two sets of RCA cables, two 8-gauge ring terminals, two 18-gauge butt connectors, and a hex key.


    Warnings:
    California Proposition 65 Warning: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

    Note: Please refer to product packaging for the most up to date country of origin.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    5.0

    Customer Reviews (1)

    Questions & Answers

    No questions about this product yet. Ask the First Question