Spindle Bolt Set - Less Spindle Bolts - Use This Kit If Your Original Spindle Bolts Are In Usable Shape (1928-1931 Model A; 1928-1931 Model AA)Find parts that fit my vehicle

Please note; the bushing must be reemed.

USA made. Use this kit if your original spindle bolts ( king pins ) are in usable shape.

Worn spindle bolt parts contribute to rough steering and shimmy. This set contains the grooved lock pin (style 3 as in judging standards), with the long lock nut used from 1929-1931. Place the cup washer with felt under the washer against the bottom of the axle. The felt can be rubber cemented to the lower spindle arm to hold it in place during assembly. The bearing sits on top of the axle with the open side of the bearing down. One or more shims are located between the bottom of the bearing and the top of the axle. Ream the bushings to .814. When connecting the brake lever to the socket or cup of the spindle bolt, check that the lever moves f

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov